In Stock
RemoteSAT (RST100)
RemoteSAT satellite terminal combines the robust design with the intelligent technology to support RJ11 / POTS, voice and data services over the Iridium satellite network. The RemoteSAT terminal is equipped with a range of interfaces to support the use of standard corded/cordless phones or integrated PABX communications. RemoteSAT also gives the option to access voice services using a compact intelligent user handset. RemoteSAT satellite terminal is capable of presenting dial, busy and ring tones to suit country specific requirements as well as auto-dial or restricted dial functionality. It also supports access to the complete range of data services provided by Iridium including Circuit Switched Data and Direct Internet as well as SMS. The RemoteSAT has been designed to be used in fixed sites, maritime and emergency service applications where permanently installed reliable communication services are required. Multiple units may be installed in the same location to provide multi-line access. There is also a purpose built back-up battery available that can provide up to 24-hours standby time for mission critical applications.
RemoteSAT (RST100)
Connectors / Interfaces | |
---|---|
Intelligent Handset | RJ45 DPL BUS |
Telephone / POTS | RJ-11 2 -wire / TN12 or 600 ohm |
Data Port | RS232 Serial Interface |
Log Port | RS232 Serial Interface |
Power | 2 Pin screw type |
Kit Contents | |
---|---|
Mounting Brackets | x |
DC 1.5m Power Cable | x |
RST100 Main terminal | x |
Commands, Manuals | x |
CD – Beam Management System, AT | x |
User & Installation Manual | x |
Data Cable | x |
110-240V AC Plug Pack | x |
Environmental Specifications | ||
---|---|---|
Corrosion | 40 °C with 90% – 95% relative humidity after 2h salt spray | |
Vibration | 2 Hz – 13.2 Hz & 13.2 Hx – 100 hz | |
Operating Range | -15 to +55°C | +5 to +131°F |
Storage | -30 to +70 °C | -22 to 158°F |
Humidity | 93% non condensing |
Power Specifications | ||
---|---|---|
Standby | 0.35 | 0.16 |
Transmit – inc handset | 0.59 | 0.29 |
Standby – inc handset | 0.47 | 0.22 |
Power Consumption (AMPS) | 12 V DC | 24 V DC |
Power Input Voltage | 11 – 32 V DC | |
Transmit | 0.51 | 0.25 |
Physical Specifications | ||
---|---|---|
Outer Box Dimensions | 330 W x 430 D x 95 H (mm) |
13 W x 16.93 D x 95 H (inches) |
Box Weight | 4.22 kg | 9.30 lbs |
Weight – lbs | 4.9 | 7.1 |
Dimensions – inches | 8.9 x 10.9 x 2.1 | 15.7 x 12.8 x 3.5 |
Dimensions – mm | Unit only 225 x 277 x 53 |
Packed 400 x 325 x 90 |
Weight – kg | 2.25 | 3.25 |